Here is a rewound ignition #29657coil for an early Briggs and Stratton engine. It mounts with three holes on each leg and is for models F, FB,FC,FE,FG,FH,FI,FJI,FML,M,MB,PB,Q,R,S,T,W and possibly others. Check your parts book to be certain. It has been vacuum/pressure impregnated with a heat cure epoxy resin and wound good and hot as it should be. Price is with core exchange. Will ship your order at once by priority mail to US addresses when we receive your useable core. These are hand made right here in the Columbia River Gorge and appearances may vary slightly from photo. May return in 10 days in condition shipped if not pleased. Thanks for looking. Any questions, please ask oldcroak magneto. We also have available the later style that has screws and four pins for mounting and others. Contact the oldcroak if you need one!
Posted by John Hunsinger on 11th Oct 2016
A great coil makes for easier starting and a good running engine. I have experience in the electronics industry, and can identify a quality product. My restored Briggs FH and FI both have Oldcroak armatures and are a pleasure to start and run.
Posted by John Hunsinger on 3rd Sep 2016
I recently acquired an FI Briggs engine. It had an open secondary winding, so I replaced the armature with a rewound unit from Oldcroak. Great results! Good quality work and excellent customer service,